6 ≤ pHT ≤ 8.2 and a substantial range of salinity (30 ≤ S ≤ 36.2) and temperature (15 °C ≤ t ≤ 30 °C).

Agreement relative to narrowband spectrophotometric pHT measurements (relative accuracy) was on the order of ± 0.008, with a precision of ± 0.002. These results demonstrate that LED photometers can be conveniently and routinely used to make seawater pHT measurements in the field and that these measurements will be closely comparable to measurements obtained using research-grade spectrophotometers in the laboratory. Table 1 summarizes the characteristics of several types Stem Cells antagonist of pH sensors, including the new LED photometer. The photometer’s inexpensive hardware, comparatively good accuracy, and one-time calibration make this instrument suitable for applications where cost-effective pH precision and accuracy are desirable but extremely high precision is not required. Such applications might include aquaculture, aquarium management, coastal environmental monitoring, and citizen science and educational programs. Photometer construction is straightforward. All components are readily available off the shelf, and their assembly requires only a moderate level of do-it-yourself technical expertise. The portable broadband photometer can also be adapted for other

chemical analyses through the use of different colorimetric indicators and LED light sources. Because different sulfonephthalein indicators (e.g., cresol red, thymol Selleck R428 blue) are well suited for different pH ranges, judicious selection of indicators and LEDs can provide accurate pH measurements over much of the broad range of conditions characteristic of both Bcl-w natural and manipulated fresh and marine waters. Combined with other techniques (e.g., acidimetric titration) and other colorimetric indicators (e.g., bromocresol purple, bromocresol green), LED photometers could also be used to measure concentrations other than hydrogen ions—for example, concentrations of total alkalinity, total dissolved inorganic carbon, and

nutrients. In summary, LED photometers show great promise for providing convenient, high-quality, low-cost measurements of seawater pH and other analytes in a variety of marine and freshwater settings. J. Kolesar’s work on the printed circuit board, A. Ringelpaugh’s help with the aquarium test, the insightful comments of T. Clayton, C. Lembke and R. Russell, and the programming advice of M. Lindemuth, Dr. D. Mann and J. Patten are greatly appreciated. We acknowledge support from the NOAA Ocean Acidification Program and fellowship support to Bo Yang from the C.W. Bill Young Endowed Fellowship. “
“The authors regret for the corrections and wishes to include the below information: The calculations of pK1 and pK2 for carbonic acid on the free scale were in error. The correct values on the seawater pH Scale, Total pH Scale and Free pH scale are fitted to equations of the form pKi*=pK0i+e1S0.5+e2S+e3S2+e4S0.5/T+e5S/T+e6S0.