Bulk heterojunction polymer solar cells (PSCs) were fabricated based on the blend of the as-synthesized polymers and the fullerene derivative ABT 263 [6,6]-phenyl-C-61-butyric acid methyl ester (PC61BM) in a 1:2 weight ratio. The maximum power conversion efficiency of 2.06% was obtained for PL5-based PSC under the illumination of AM 1.5, 100 mW/cm(2). (C) 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 49: 3604-3614, 2011″
“In the first part of this paper the authors describe an innovative sandwich

panel that comprises Glass Fibre Reinforced Polymer (GFRP) connectors and two thin layers of Steel Fibre Reinforced Self-Compacting Concrete (SFRSCC). This second part of the paper reports the investigation performed by the authors based on the numerical simulation of these sandwich panels. The simulations use the Finite Element Method (FEM) software implemented by the second author (FEMIX). Through linear static analyses and consideration of Ultimate Limit State

loading scenarios, parametric studies were performed in order to optimise the arrangement of the GFRP connectors and the thickness of the SFRSCC layers. Moreover, models considering a specific nonlinear behaviour of SFRSCC were also constructed in order to simulate the progressive damage of the panel induced by cracking. In the scope of the nonlinear analyses, emphasis is Volasertib clinical trial given to parameter estimation of fracture modelling parameters for the fibre reinforced concrete based on both inverse analysis and the fib Model Code. (C) 2013 Elsevier Ltd. RSL3 mw All rights reserved.”
“Bio-oil is a promising alternative source of energy produced from fast pyrolysis of biomass. Increasing the viscosity of bio-oil during storage is a major problem that can be controlled by the addition of methanol or other alcohols. This paper reports the results of our investigation of the reactions of short chain

alcohols with aldehydes and acids in bio-oil. The reaction of methanol with hydroxyacetaldehyde (HA) to form the acetal was catalyzed by the addition of 7 x 10(-4) M strong acids such as sulfuric, hydrochloric, p-toluene sulfonic acid, and methanesulfonic acid. HA formed 2,2-dimethoxyethanol (DME), and at 60 degrees C the equilibrium was reached in less than one hour. Smaller amounts of DME were formed in the absence of strong acid. HA, acetaldehyde, and propanal formed their corresponding acetals when reacted with methanol, ethanol, 1-propanol or 1-butanol. Esters of acetic acid and hydroxyacetic acid were observed from reactions with these same four alcohols. Other acetals and esters were observed by GC/MS analysis of the reaction products. The results from accelerated aging experiments at 90 degrees C suggest that the presence of methanol slows polymerization by formation of acetals and esters from low molecular weight aldehydes and organic acids.