The indirect detection methods must be MK-8776 in vitro sensitive enough that even small amounts of product can trigger a signal from the coupled system. In other words, the secondary detection system cannot be rate-limiting or the kinetics of detection will be observed, not the kinetics

of the reaction. Alternatively, the detection reagents must be in sufficient quantity to detect generated product amounts without being consumed completely. For instance, in two-component detection systems such as HTRF, high amounts of product can saturate the detection components, leading to an artificial plateau in the reaction curve. This can be mistakenly interpreted as having reached equilibrium, when in fact, allowing the reaction to continue will actually generate a decreasing curve. This “hook effect” is common and can be observed, for example,

when titrating a biotinylated peptide which is recognized by an antibody-linked to a donor fluorophore to create a FRET signal when an appropriate acceptor fluorophore is in close proximity ( Figure 5). The “hook effect” can be identified by generating a product standard curve and testing various concentrations of detection components. Finally, the interference by the compounds being assayed with the coupled system must be considered. With the many caveats of indirect detection systems, there are still many situations in which an indirect detection method is superior to a direct Enzalutamide supplier detection method. Particularly for use in HTS, many

direct detection techniques (radioactive substrates/products, Western blots, HPLC, NMR) cannot be adapted for the throughput and automation required to efficiently process large numbers of compounds. The cost of reagents and supplies must also be weighed when considering a detection technique and the cheapest option in the short term may be the least cost effective over the course of an entire screen. Many of the enzyme assays used in HTS that are discussed in the next section involve indirect detection methods. As an example of direct detection, mass spectrometry is often an ideal method for assays involving post-translational modifications such as hydroxylation, phosphorylation or acetylation of substrate peptides, limitations on maximum BCKDHA throughput capabilities may preclude the use of this technique in favor of an indirect detection method such as time-resolved-fluorescence energy transfer (TR-FRET) or Amplified Luminescent Proximity Homogenous Assay (AlphaScreen™, see below). For instance, a multiplexed LC/MS detection protocol can process samples at 30 s per well, or about 3 h per 384w plate. At 8 plates per day, it would take 47 non-stop weeks to screen a deck of 1 million compounds, not counting controls. However using HTRF detection and a ViewLux which can read a 1536-well plate in approximately 2 min, the same screen can be accomplished in 22 h of total read time, saving both time and money.